Submersible pumps for the well: 15 best models + tips for customers

Production of submersible pumps Whirlwind is carried out in China on the basis of Russian developments. Model SN-90V refers to screw borehole electric pumps and is designed for pumping clean water. The unit is equipped with a rubber check valve. However, users are advised to replace it with a metal one when operating the pump in a deep well.

Due to design features, the screw unit SN-90V can only be used in a clean environment. Otherwise, particulate and sand abrasives can damage the surface of the hub mirrors.

Technical features:

• how deep it sinks - 35 m;
• what water it works with - with clean;
• how much it consumes - 550 watts;
• throughput - 1.5 cubic meters. m / hour;
• ultimate pressure - 90 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - from +1 to +35 ° C;
• type of mechanism - screw;
• installation method - vertical;
• power cord - 17 m;
• weight - 8.7 kg;
• optionally a check valve.

Vortex SN-90V is popular with owners of private houses and summer residents with an autonomous water supply system. The main reason for demand is a reasonable price-performance ratio.

Among the complaints, sensitivity to voltage drops is sometimes noted - with an indicator of less than 190-200 V, the unit does not turn on. Experienced users advise changing the fastening pin immediately after the purchase, since the factory one quickly becomes unusable.

The vortex type pump is corrosion resistant and protected against water ingress. A single-phase motor is placed in the oil chamber, the working end of the shaft and the housing are made of stainless steel. The engine mount and pump wheel are made of brass.

The protection class of the NeoClima DWV-60 / 2.7 is IP68. The pump provides thermal protection with forced activation, preventing damage to the motor in case of emergency.

Technical features:

• how deep it sinks - 70 m;
• what water it works with - with clean;
• how much it consumes - 750 watts;
• throughput - 2.7 cubic meters. m / hour;
• ultimate pressure - 60 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - up to +35 ° C;
• type of mechanism - vortex;
• installation method - vertical;
• power cord - 30 m;
• weight - 11.5 kg;
• optionally an oil-cooled electric motor.

There are few reviews on the operation of the pump, since the model appeared on the market recently. However, a good balance of cost, performance, and build quality is noteworthy. The model is suitable for pumping water with a sand content of not more than 40 g / cu. m

The unit with a dustproof stainless steel housing is suitable for supplying water to a private household that is not connected to a central communications network.

It works with optimum efficiency and maintains a stable pressure of water in the system.It is connected to the power supply via a long cable equipped with a practical euro plug.

Technical features:

• how deep it sinks - 15 m;
• what water it works with - clean without abrasive elements;
• how much it consumes - 480 watts;
• throughput - 1.5 cubic meters. m / hour;
• ultimate pressure - 70 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - up to 35 ° C;
• type of mechanism - centrifugal oil-filled single-phase;
• installation method - vertical;
• power cord - 15 m;
• weight - 6.3 kg;
• useful additions - the ability to make up to 20 starts per hour.

Inexpensive, compact apparatus fits comfortably in narrow wells, provides a normal supply of water and does not lose pressure head, even when two fluid sampling points are opened at the same time.

There are single complaints of rust on the pump housing and bolts. When the water level decreases, the screw shaft continues to work dry, which is fraught with abrasion of the rubber gasket and a decrease in pressure.

The Aquarius pump is a universal assistant. It is often used by residents of rural areas and summer residents to lift water from a makeshift well or well, fill tanks, barrels or pools.

Some have adapted and use the pump for drainage and treatment, although such an operation is fraught with damage to the unit.

The model has a lower water intake. The device body is made of plastic, and the outlet and inlet pipes are made of steel. The working piston is made of molded rubber, which ensures the reliability of the oscillating part. The Aquarius-3 pump has a self-resetting fuse - it is triggered in an emergency (clogging of the hydraulic chamber, work without water, hose bend).

Technical features:

• how deep it sinks - 40 m;
• what water it works with - with clean;
• how much it consumes - 265 watts;
• throughput - 1 cubic meter m / hour;
• ultimate head - 40 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - up to +35 ° C;
• type of mechanism - vibration;
• installation method - vertical;
• power cord - 10 m;
• weight - 4 kg;
• optionally - lower water intake, self-resetting fuse.

The price of the pump is within 2000 rubles. The cost is quite competitive, so this device is in demand. The electric pump is praised for continuous operation without failures, good equipment and low maintenance.

The vibration pump is used to lift clean water from wells, boreholes, open water bodies and other tanks with a diameter of 100 mm or more. The unit is sensitive to the quality of the pumped liquid - the amount of mechanical impurities, fibrous and solid inclusions should not exceed 100 g / cu. m

The BAVLENETS BV 0.12-40-U5 pump meets sanitary standards and is suitable for supplying drinking water. Units of the UNIPUMP BAVLENETS series can function from solar and gas-electric generators with a power from 0.5 kW.

Technical features:

• how deep it sinks - 40 m;
• what water it works with - with clean;
• how much it consumes - 245 watts;
• throughput - 1.6 cubic meters. m / hour;
• ultimate head - 75 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - up to +35 ° C;
• type of mechanism - vibration;
• installation method - vertical;
• power cord - 10 m;
• weight - 10 kg;
• Additionally - a nylon cable is included.

The pump is quite popular among summer residents. It is often used for watering a personal plot, filling barrels and other tanks with water, as well as organizing individual water supply. The unit is easy to operate and is relatively inexpensive - about 1700-2000 rubles.

However, the reviews about the work of BAVLENETS BV 0.12-40-U5 are contradictory. Some call the pump one of the best options in the price / head category. There are few complaints about the breakdown of the pump in the first six months of operation.

A pump manufactured in Belarus is in demand, as evidenced by numerous customer reviews. The Trickle-1 model is in demand in organizing water supply and irrigation systems.

The unit has an upper water intake, which helps to cool the electromagnetic system and protect the device from overloads. This design solution eliminates the absorption of sludge and turbidity of the water.

Technical features:

• how deep it sinks - 60 m;
• what water it works with - with clean;
• how much it consumes - 225 watts;
• throughput - 1.05 cubic meters. m / hour;
• ultimate pressure - 60 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - up to +35 ° C;
• type of mechanism - vibration;
• installation method - vertical;
• power cord - 10 m;
• weight - 3.6 kg;
• in addition - overheat protection, upper water intake.

The pump Rucheek-1 helps many summer residents in the watering season of gardens and kitchen gardens. Among the many positive feedback on the reliability and durability of the work, there are complaints about a quick breakdown. The likely reason for these different reviews is the appearance of fakes on the market.

To avoid low-quality goods, equipment must be purchased at specialized points and require the appropriate documents.

Centrifugal deep pump for arranging individual water supply at home, watering the garden, irrigating vegetable beds, supplying water to greenhouses and poultry houses.

The case BELAMOS TF3-40 is made of high quality stainless steel, the working blades are made of technoplast, the shaft is made of NBR graphiteceramics. The pump has an increased number of compression stages to stabilize the pressure characteristics. The unit is designed to supply clean water - the permissible sand content in the water is within 180 g / m³.

Technical features:

• how deep it sinks - 80 m;
• what water it works with - with clean;
• how much it consumes - 550 watts;
• throughput - 2.7 cubic meters. m / hour;
• ultimate head - 42 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - up to +45 ° C;
• type of mechanism - centrifugal;
• installation method - vertical;
• power cord - 20 m;
• weight - 9.4 kg;
• Additionally - overheat protection, multi-stage suction system.

Numerous reviews confirm the demand for BELAMOS TF3-40. In practice, the pump proved to be a reliable unit with good performance. Users note that the bucket is filled in 7-8 seconds. Such a model will simultaneously “pull” the maintenance of a private house and watering the garden.

A pump with a diameter of 70 mm is suitable for narrow wells, the maximum immersion depth is 60 m. In a minute, the unit can raise up to 46 liters of water - this is a good indicator, given the relatively low cost of the device itself. The price of CALIBER NPTSS-2.8 / 60-370 starts at 7,000 rubles.

Technical features:

• how deep it sinks - 60 m;
• what water it works with - with clean;
• how much it consumes - 370 watts;
• throughput - 2.8 cubic meters. m / hour;
• ultimate pressure - 60 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - up to +40 ° C;
• type of mechanism - centrifugal;
• installation method - vertical;
• power cord - 20 m;
• weight - 12.1 kg;
• additionally - thermal relay, multi-stage suction system.

Without consequences, the pump is capable of pumping water with impurities, the size of which does not exceed 0.5 mm. The device is easy to install, operates quietly and provides a good pressure of water.

However, among the reviews there are complaints about the quick operation of the thermal relay. When the unit is immersed at 30 m, the protective unit switches off the pump after 15 minutes of continuous operation, at a depth of 20 m the thermal relay trips after 40 minutes.

The model is notable for its multi-stage suction system and good equipment. The WWQ 3NSL 0.5 / 30P pump can pump up to 2800 liters per hour. The unit is equipped with a check valve, a long cable with a plug with a grounding contact and a capacitor box.

Technical features:

• how deep it sinks - 53 m;
• what water it works with - with clean;
• how much it consumes - 580 W;
• throughput - 2.8 cubic meters. m / hour;
• ultimate pressure - 53 m;
• network voltage - 220/230 V;
• type of mechanism - centrifugal;
• installation method - vertical;
• power cord - 30 m;
• weight - no data;
• in addition - 15 stages of absorption, the backpressure valve.

The price of WWQ 3NSL 0.5 / 30P is about 12 thousand rubles. The unit in our rating takes the third position, since it is difficult to objectively evaluate the performance of the equipment - there are no reviews on the operation of the device. However, good performance, thoughtful equipment and performance deserve the attention of buyers.

The submersible pump from a popular Russian manufacturer is powered by a single-phase electrical network. Equipped with a single-stage suction system and a robust stainless steel body with anodized coating that prevents the spread of corrosion.

At the bottom of the device there is a grid that protects the system from the penetration of large-sized foreign particles from outside.

Technical features:

• how deep it sinks - 30 m;
• what water it works with - with clean, permissible amount of sand in the pumped liquid - up to 2 kg / m³;
• how much it consumes - 670 watts;
• throughput - 2.4 cubic meters. m / hour;
• ultimate head - 75 m;
• network voltage - 220/230 V;
• maximum permissible fluid temperature - from +1 to +35 ° C;
• type of mechanism - centrifugal;
• installation method - vertical;
• power cord - 30 m with euro plug;
• weight - 10.9 kg;
• additionally - mesh for filtering large debris, built-in capacitor, thermal relay of the engine.

The pump demonstrates high-performance and almost silent operation. It functions correctly around the clock and provides good pressure at several points of water withdrawal. It performs well in deep wells with low debit. According to users, in 5-7 minutes it gains a 200-liter barrel.

The manufacturer recommends installing a stabilizer in case of instability of the voltage in the network. The pump must not be used in wells with water pumping less than 10 l / min.

The assembly of the Russian assembly copes with the water supply of a private house with water, as well as with watering the garden plot in the summer. The pump casing is made of stainless steel, the flanges are made of cast iron.

The suction system is single-stage, the unit is sensitive to the quality of the pumped water - in the liquid there should be no more than 100 g of mechanical impurities per 1 m³.

Technical features:

• how deep it sinks - 20 m;
• what water it works with - with clean;
• how much it consumes - 750 watts;
• throughput - 4.8 cubic meters. m / hour;
• ultimate pressure - 60 m;
• network voltage - 220/230 V;
• type of mechanism - centrifugal;
• installation method - vertical;
• power cord - 30 m;
• weight - 17 kg;
• additionally - soft start of the engine, protection against overheating.

Users note the uninterrupted operation of the pump in compliance with operating conditions. When pumping contaminated water, gear wear is likely due to sand. Productivity is enough to service 5-8 points of water intake.

A solid Chinese-made unit looks neat and features a high-quality assembly. All elements are clearly adjacent to each other and securely fastened with strong connecting parts.

High throughput makes the device especially attractive for owners of large houses with several points of water resource selection.

Technical features:

• immersion depth - 15 m;
• for which water is suitable - for clean water without chemical constituents;
• power consumption - 1100 W;
• throughput - 5.5 cubic meters. m / hour;
• maximum head - 86 m;
• mains voltage - 220/230 V;
• maximum temperature of the working fluid - up to 35 ° C;
• a kind of mechanism - a single-phase centrifugal type;
• how to put it - vertically;
• the length of the power cord is 1.5 m;
• weight - 15.6 kg;
• additional functions - multi-stage water absorption system.

A sturdy, durable stainless steel case easily tolerates a long stay in water and is not rusted throughout the entire operational life.

The internal engine is stable and not afraid of intensive workloads. Suitable for organization water supply from a well.

The household centrifugal pump with a single-phase electric motor is equipped with a 6-speed impeller made of technopolymer. The stainless steel case has a special anodized coating that prevents the formation of corrosive manifestations.

Completely dustproof device withstands prolonged immersion in water. It has a branded 18-month warranty and is serviced at certified service centers.

Technical features:

• immersion depth - 15 m;
• what water is suitable for clean;
• power consumption - 1000 W;
• throughput - 3.6 cubic meters. m / hour;
• maximum head - 60 m;
• mains voltage - 220/230 V;
• maximum temperature of the working fluid - up to 35 ° C;
• a kind of mechanism - centrifugal;
• how to put it - vertically;
• the length of the power cord is 40 m;
• weight - 13.8 kg;
• additional functions - protective system against overheating, smooth start of the electric motor.

The owners note that the pump is inexpensive, can withstand voltage drops and normally tolerates dry running. It provides a good, stable pressure and does not create a pronounced sound background during operation.

Some users note that the pump part is clogged with sand, but this may be due to errors in the installation. The content of solids in water should not exceed 1.5 kg / m³.

One of the most expensive pumps in its class. The model is designed for pumping clean water, with a maximum capacity of 60 liters per minute.

The bearing box and the drive shaft of the Pedrollo 4BLOCKm 2/10 pump are made of stainless steel, the impeller is Lexan. The single-phase electric motor is equipped with a capacitor and thermal protection.

Technical features:

• how deep it sinks - 40 m;
• what water it works with - with clean;
• how much it consumes - 550 watts;
• throughput - 3.6 cubic meters. m / hour;
• ultimate pressure - 65 m;
• network voltage - 220/230 V;
• type of mechanism - centrifugal;
• installation method - vertical or horizontal;
• power cord - 20 m;
• weight - 10.2 kg;
• additionally - soft start of the engine, 10-stage suction system, check valve from technopolymer, protection against overheating.

The pump is recommended for supplying water with sand content within 150 g per 1 cubic meter. m. Due to its high efficiency, the unit can be used in everyday life and in industry, used to irrigate gardens and vegetable gardens, as well as increase the pressure in fire safety systems.

Pump Pedrollo 4BLOCKm 2/10 is not in great demand, the main reason is the high price tag. The cost of the unit starts from 27 thousand rubles.

The Ukrainian-made unit of the Promelectro plant has earned a reputation for reliable, unpretentious equipment for maintenance. The casing and pump shaft are made of stainless steel, the impeller material is technopolymer, the lower and upper cover are made of bronze. The manufacturer provides a guarantee for Aquarius BTsPE 0.5-80U - 1.5 years.

The pump is equipped with a capacitor block and an electric cable. A thermal relay is built into the engine winding to protect the unit from overloads. There is an automatic restart after the relay is activated.

Technical features:

• how deep it sinks - 15 m;
• what water does it work with - with clean, permissible amount of impurities - up to 1500 g / m³;
• how much it consumes - 1600 watts;
• throughput - 3.6 cubic meters. m / hour;
• ultimate head - 120 m;
• network voltage - 220/230 V;
• type of mechanism - centrifugal;
• installation method - vertical;
• power cord - 80 m;
• weight - 19 kg;
• additionally - condenser box, thermal relay, multi-stage suction system.

The unit works without any complaints, the pressure does not drop during operation. Instead of using the supplied rope, some users recommend using a cable to lower the pump into the well.