The best channel fans: TOP-15 popular devices + recommendations to potential buyers

The mixed type fan of the Russian manufacturer “Vents” is intended for installation in round ducts with a diameter of 100 mm, which serve as air ducts in the supply and exhaust systems.

The main installation site is ventilation shafts, but if necessary they are also suitable for installation in connections with air ducts. The engine of the model withstands up to 40 thousand hours of continuous operation.

Specifications:

• power - 33 W;
• air exchange - 187 m³ / hour;
• case - plastic;
• moisture protection - yes;
• Noise - 36 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 16.7 * 19 * 24.6 cm;
• weight - 1.45 kg.

TT series devices are recommended to be installed in channels with special operating conditions - high pressure or high humidity. They are chosen for installation in private homes and industrial premises with relatively little air exchange.

Quiet and economical Spanish-made axial device is designed for installation in long ducts in rooms requiring low noise.

This is one of the quietest fans, equipped with additional noise isolation and rubber "silent blocks" that soften vibration.

Specifications:

• power - 29 W;
• air exchange - 180 m³ / hour;
• case - plastic;
• moisture protection - yes;
• Noise - 24 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 15.1 * 16.3 * 23.2 cm;
• weight - 1.4 kg.

The devices of the TD series are designed for installation in circular ducts, suitable for equipping domestic and industrial ventilation systems. Fasteners included.

The radial centrifugal device of the Russian manufacturer "Era" of the "Mars" series is suitable for installation in round channels supply and exhaust systems.

Available in various sizes - up to 315 mm in diameter. The speed of rotation is adjusted using a stepless controller.

Specifications:

• power - 70 W;
• air exchange - 380 m³ / hour;
• case - stainless steel;
• moisture protection - yes;
• noise - 49 dB;
• the ability to connect a remote control - no;
• dimensions (w * h * d) - 29.8 * 24.3 * 19.4 cm;
• weight - 3.5 kg.

A fan with equal efficiency is ready to serve domestic, public, industrial premises. It is often purchased for installation in cottages (subject to good sound insulation), basements, garages.

VKO series of the Russian manufacturer “Vents” is an axial household model for installation in circular ducts.

They have sufficient capacity to service small living spaces.

Specifications:

• power - 14 W;
• air exchange - 105 m³ / h;
• case - plastic;
• moisture protection - yes;
• Noise - 37 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 10.4 * 10.4 * 9.1 cm;
• weight - 0.41 kg.

EKR fans with a diameter of 100 mm are recommended to be installed in cottages, in apartments, in private country houses in the ventilation ducts of domestic premises, such as a kitchen, a bathroom, a combined bathroom.

The household axial model of the Russian DiCiTi brand is designed for operation in domestic conditions, for the installation of supply / exhaust systems.

Mounted in round ducts disguised in the walls and under the ceiling. There is protection against backdraft.

Specifications:

• power - 16 W;
• air exchange - 115 m³ / hour;
• case - plastic;
• moisture protection - yes;
• noise - 32 dB;
• the ability to connect a remote control - no;
• dimensions (w * h * d) - 13.8 * 13.9 * 9.1 cm;
• weight - 0.41 kg.

Lightweight, low-performance fan cooker hoods, as well as ducts for bathrooms and bathrooms.

The axial industrial model of the Russian manufacturer Vents, designed for installation in circular channels with a diameter of 200 mm.

The working mechanism of the mixed type, the engine runs at 2 speeds.

Specifications:

• power - 108 W;
• air exchange - 1040 m³ / h;
• case - plastic;
• moisture protection - yes;
• Noise - 45 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 23.9 * 26.1 * 29.55 cm;
• weight - 3.95 kg.

The device is designed to equip the supply and exhaust systems of industrial facilities, commercial premises, public buildings.

For household equipment ventilation ducts We recommend choosing a low-power and quieter model.

Highly functional Spanish-made fans of the SILENT series are one of the quietest devices in the listed overall categories.

The device, designed for installation in an air duct with a diameter of 150-160 mm, is designed for rooms with strict requirements for noise level.

Specifications:

• power - 59 W;
• air exchange - 550 m³ / h;
• case - plastic;
• moisture protection - yes;
• Noise - 27 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 22.1 * 27.4 * 48.4 cm;
• weight - 6 kg.

The device is suitable for equipping ventilation systems in hospitals, sanatoriums, boarding houses, rest houses, entertainment facilities, educational institutions. Vertical and horizontal installation is possible, fasteners are included.

The axial duct device is specially designed for installation in 120 mm low pressure ducts.

Recommended for ventilation systems designed for heat exchange in adjacent rooms or for exhaust air.

Specifications:

• power - 16 W;
• air exchange - 190 m³ / h;
• case - plastic;
• moisture protection - yes;
• Noise - 42 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 12 * 12 * 15.6 cm;
• weight - 0.7 kg.

Silentub fans buy for home use. They are great for equipping private homes, garages and basements, warehouses and storage facilities.

The next model of Vents production of the TT series is similar in design and function to the PRO 200 and differs only in the diameter of the duct - it is designed for installation in a channel of 125 mm. Accordingly, performance is also less.

Specifications:

• power - 29 W;
• air exchange - 350 m³ / h;
• case - plastic;
• moisture protection - yes;
• noise - 32 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 19.56 * 22.6 * 25.85 cm;
• weight - 2.15 kg.

The device works equally effectively in domestic premises and in small workshops. It is often operated in home ventilation systems to ventilate kitchens, bathrooms and bathrooms.

Axial fan of the Spanish brand Soler & Palau, 2 times superior in power and performance to the model presented above with an installation diameter of 150 mm.

Designed for installation in 200 mm ducts. This is one of the quietest models.

Specifications:

• power - 120 W;
• air exchange - 1030 m³ / h;
• case - plastic;
• moisture protection - yes;
• Noise - 21 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 26.4 * 32.7 * 56.8 cm;
• weight - 8.7 kg.

The device is purchased for residential premises with special requirements for noise levels: hospitals, preschool educational institutions, resorts, theaters, offices.

Like the other fans of the TT PRO series, the device is designed for installation in supply and exhaust systems.

This is the most powerful, respectively, and the most expensive model in the lineup, equipped with a 2-speed engine with smooth adjustment.

Specifications:

• power - 330 W;
• air exchange - 2350 m³ / h;
• case - plastic;
• moisture protection - yes;
• noise level - 58 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 36.2 * 40.8 * 44.5 cm;
• weight - 11.4 kg.

Powerful models with an installation diameter of 315 mm are not used for installation in private homes. In cottages and cottages, pipes of this section are not used.

This is an option for commercial and industrial use, to ensure air exchange over a large area.

The model of the Vents brand differs from the previous modification in its design - it is a radial fan operating due to centrifugal force.

Installation of the unit can be done both on the wall from the inside of the building, and outside.

Specifications:

• power - 240 W;
• air exchange - 1340 m³ / hour;
• case - stainless steel;
• moisture protection - yes;
• noise level - 53 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 35 * 34.4 * 24.9 cm;
• weight - 5.1 kg.

Radial models are recommended to be installed in commercial and industrial buildings: at enterprises, spacious warehouses, service stations, etc.

The next fan of the Spanish brand with a radial mechanism differs from previous models in performance: the case is made of sheet steel, and the blades are made of high-quality plastic.

The rotation speed can be adjusted by changing the voltage.

Specifications:

• power - 180 W;
• air exchange - 1100 m³ / hour;
• case - stainless steel;
• moisture protection - yes;
• Noise - 54 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 33.3 * 33.3 * 20.6 cm;
• weight - 6 kg.

The centrifugal fan is used in commercial and industrial ventilation systems; it can be used in rooms with a high degree of humidity.

Powerful centrifugal fan of the Russian brand "Era" refers to universal models suitable for the equipment of supply and exhaust domestic and industrial systems.

This model is designed for installation in round ducts with an installation diameter of 315 mm.

Specifications:

• power - 250 W;
• air exchange - 1500 m³ / h;
• case - stainless steel;
• moisture protection - yes;
• noise level - 53 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 40.2 * 45.7 * 22.8 cm;
• weight - 7 kg.

The fan is suitable for equipping supply and exhaust systems of multi-apartment buildings, production shops, garages, hangars for various applications.

Compact axial model of production "Era" for installation in round ducts.

For reliability, the body is made of stainless steel with a polymer coating, and the blades are made of aluminum profile.

Specifications:

• power - 42 W;
• air exchange - 600 m³ / h;
• case - stainless steel;
• moisture protection - yes;
• noise - 57 dB;
• the ability to connect the remote - yes;
• dimensions (w * h * d) - 25 * 25 * 27.5 cm;
• weight - 2.8 kg.

The devices are suitable for equipping ventilation ducts of workshops, warehouses, utility rooms, shops, restaurants, etc.