Bidet prefix for a toilet: an overview of the types of bidet consoles and methods for their installation

Anyone likes comfort, so many developers are involved in the creation of domestic amenities. The traditional bidet already surprises few people. A free-standing device has long been used in most bathrooms. It is very comfortable and hygienic.

But if the toilet room is small in size, it is impossible to install it. Especially for such cases, a bidet toilet attachment has been developed. We will tell you how to choose this mini-version of the hygiene device and how to correctly install it.

Why is it necessary to use a bidet?

It must be admitted that for our compatriots a bidet is often not perceived as an essential item. It is generally accepted that after visiting the toilet, it is enough to use toilet paper, it does not matter, dry or wet.

In fact, this is not enough. Doctors conducted studies confirming that it is impossible to remove all contaminants in this way.

In a humid and warm environment, they will become an excellent nutritional basis for the development of a large number of microorganisms. Which in the best case will lead to the appearance of an extremely unpleasant odor, in the worst - to the development of inflammatory processes.

Therefore, in many countries of the world, washing of intimate areas after visiting the toilet is an absolute norm. A bidet helps you perform this procedure with the greatest comfort.

The traditional version of the bidet in the form of a stand-alone plumbing fixture can not be placed in all bathrooms, since it requires a lot of space to install it

There are many varieties of the popular plumbing fixture. The first models that appeared in the 17th century were simple baths with water. Cold / hot water, as well as sewer pipes for draining used liquid, are supplied to modern devices.

All this requires a sufficiently large amount of free space.For small bathrooms, bidet consoles, which appeared relatively recently, are ideal.

Prefix bidet: what is it?

The equipment is intended for installation on or near the toilet, which allows the plumbing fixture to simultaneously fully perform two functions at once. The main advantage of the device is maximum saving of free space. Consoles vary in design. There are three main types of such devices.

Bidet toilet lid

The plumbing fixture looks very much like a traditional toilet lid, though more massive. In addition, it is equipped with additional devices: a water-supplying retractable tap and a special remote control, with which you can adjust the temperature and pressure of the liquid.

The simplest models only supply water. They are equipped with a stationary tap, which is very inconvenient, since the use of the toilet in this case is complicated.

More complex electronically controlled devices equipped with a retractable nozzle, which takes the working position after pressing a special button. After use, the valve slides into the cover.

In addition, bidet covers can be equipped with such additional functionality:

• The choice of various operating modes. This can be a mono jet, a pulsating jet, a enema wash or a stream of water saturated with air.
• Regulation of the temperature of the flowing water. Including heating it to the desired temperature.
• Special children's mode. Assumes options for the length of the extension of the nozzle and the regulation of water pressure.
• Drying mode after using a bidet. In this case, toilet paper is not required.
• Heated toilet seats to a comfortable temperature.
• Hydromassage. A set of massage variations is suggested.
• The choice of the most comfortable pressure of the flowing water.
• Purification and ozonation of air in the toilet room after using the toilet.
• The "anti-clap" function or the warning of a strong blow of the lid on the rim of the toilet bowl.

This is the main functionality that can be equipped bidet cover. In some cases, at the request of the future owner, it can be further expanded.

Bidet cover taps are always anti-bacterial. Usually they are equipped with a self-cleaning mode, which allows you to effectively clean the nozzles

Design and purpose of bidet consoles

This nozzle is a system of a mixer, shower and connecting hoses. The whole structure is fixed on the base, which is made in the form of a metal strip.

To secure the device to the toilet, holes are cut out on the bar. Their location exactly matches the mounting holes of the toilet lid. The prefix is ​​equipped with a pull-out type sprayer.

The bidet attachment is fixed under the toilet lid. All components necessary for the operation of the equipment are installed on the base plate

To supply water, a button on the control panel is pressed or a ball valve is turned. The nozzle extends to the working position under the pressure of the flowing water. After the fluid supply is shut off, the spray gun automatically locks into place. Like covers, bidet boxes with mixers differ in functionality.

The simplest appliances only serve water.

More complex models may have this functionality:

• Regulation of water pressure from minimum to maximum.
• Automatic spray cleaning.
• Mixing warm water and regulating its temperature.
• Hydromassage; one or more treatment options are offered.
• Drying the intimate area.
• Ozonation of air in the toilet room.

The prefix can be equipped with one nozzle or several. In the latter case, various nebulizers are offered for women, men and children. Equipment designed specifically for certain toilet models is available. It usually has a special marking.

Hygiene Shower Head

This equipment is often used as a bidet. Such a nozzle is also fixed under the toilet seat, but unlike the above devices does not have a spray. It is replaced by a traditional shower head, which can be fixed directly to the side of the toilet or to the wall. The device is built in and outdoor.

The hygienic shower head is similar to a bidet attachment, but instead of a retractable nozzle, it is equipped with a shower head, which is fixed to the toilet or to the wall

Using such equipment is extremely simple. After the person has used the toilet, he turns on the mixer. This can be done by turning the ball valve or by activating a button that turns on the water supply.

Then directs the spray to areas of the body that need washing. Hygienic shower less functional than a prefix or a bidet cover. In addition to supplying water, it allows the user to adjust its pressure and temperature.

The latest models of such devices are equipped with faucets with thermostats. This allows you to always get water at a comfortable temperature and the desired pressure.

In addition, there is no danger of accidental burns if too hot water is supplied. The functionality of the device is minimal, but it is extremely easy to operate and, when used correctly, rarely fails. The same cannot be said for sophisticated models equipped with electronics.

Which is better: prefix, cover or shower?

It is important for a customer interested in acquiring a bidet to know which equipment option is recognized as the best. Let's try to figure it out. Consider the advantages of such devices.

For all three types of devices they are the same:

• The process of hygiene procedures becomes extremely convenient. In this case, after visiting the toilet, a person does not need to go anywhere.
• Economical water consumption. On average, about one liter of fluid is spent on one procedure.
• Hygienic washing of intimate zones is the best prevention of all kinds of inflammations and genitourinary infections.
• The equipment can be used by children, men and women.
• Significant savings in the free space of the bathroom, which is especially important in a small room.

The use of covers and consoles gives some more advantages. Hydromassage is considered the best prevention of prostatitis and hemorrhoids.

Delicate drying of intimate areas makes it possible not to use toilet paper, which can be very important during an exacerbation of certain diseases, for example, the same hemorrhoids. The operational characteristics of the equipment vary greatly.

Bidet covers are the most functional. The manufacturer equips them with a large number of various functions, the control panel is usually located on the side of the toilet

If we talk about universality, then showers and consoles are suitable for any toilet. The cover requires selection depending on the model and size of the device.

The shower and set-top box boasts a simpler installation, since they do not require an electrical connection, while the lid is necessary. In addition, the latter is more expensive than its counterparts and may not be convenient enough to use.

This applies to cases where there are children among users of the bidet. The shower and the console are completely universal. For the lid you will need to additionally purchase a special child seat and, if necessary, put and remove it from the toilet, which may not be very convenient.

Practice shows that the longest service life hygienic shower, in second place - consoles and the most short-lived electronic covers. Especially cheap models made of low quality plastic.

The universal complex of a bidet nozzle and a hygienic shower is practically devoid of flaws, because one device harmoniously complements another:

Features of mounting different types of bidet nozzles

The easiest way to install a hygienic shower. It has its own mixer, which is connected to the water pipes through flexible hoses.

Installation is carried out with mandatory sealing of all connections, for which Fum tape or similar materials are used. The mixer is placed in the selected place, fixed with fasteners, after which the water supply is connected to it.

The easiest way to install a hygienic shower. For its installation, it is enough to install a mixer, if it is provided for by the model, or a shower head and connect them to the water supply

Installing a bidet attachment is carried out in strict accordance with the manufacturer's instructions, which may vary slightly depending on the model of device.

In general terms, the installation procedure is as follows:

1. We block the water in the bathroom, or in the whole apartment, unless otherwise possible.
2. Carefully remove the lid on the toilet.
3. We take the base plate and put it on the rim of the toilet bowl so that the mounting holes of both devices match exactly.
4. We insert the bolts into the mounting holes and put on the cone gaskets on them, then the washers.
5. We take the prefix and insert it into the plate fixed on the toilet. A light click will signal that the structure is installed correctly.
6. We put the toilet lid in place and tighten the bolts.
7. We connect the prefix to the water supply, using flexible eyeliner for this.

The device is ready for use. You can carry out a test run, during which it is necessary to check the presence of possible leaks at the joints of flexible hoses.

The bidet cover is mounted differently. Before starting work, experts recommend that you carefully read the instructions. This is especially important given the variety of models of bidet covers and the fact that electronic components are present in their design.

During the installation of the bidet attachment, it is important to precisely combine the mounting holes on the base panel and the fastenings of the toilet lid

Installation of equipment is somewhat complicated by the need to connect not only to the water supply, but also to the electrical network.

An independent plumber will need to perform the following steps:

1. Turn off the water supply to the bathroom.
2. Disconnect the hose that supplies water to the tank.
3. Gently unscrew the nuts securing the toilet seat and remove it.
4. We install the bidet cover on the toilet and fix it with special mounts.
5. We connect the flexible eyeliner for the tank with one end to the T-valve, and the other with the tank.
6. We mount a filter on the T-shaped valve, to which with a plastic nut we attach to the hose coming from the bidet cover.
7. We connect the equipment to the network using a cord with a plug.

The device is ready to go. You can open the water and check for possible leaks, as well as test the functionality of the bidet cover.

About how it is made setting a full bidet, described in detail in the article, the contents of which we advise you to read. Then you can compare how much easier it is to install mini-options, moreover, in operation and maintenance they are simpler.

Quick Install Guide

Consider, for example, the process of installing and connecting a simple bidet pad. A completely inexperienced home master can easily do this job. The whole procedure includes several standard steps:

We will assume that we successfully coped with the installation and fastening of the lining. It remains only to connect the device to the hot and cold water lines:

Features of the choice of plumbing equipment

When buying various consoles and bidet covers, in addition to the functionality, special attention should be paid to the dimensions of the device. You must know the exact distance between the fasteners.

In some models from well-known manufacturers, the mounting holes can be adjusted within 0.8-1 cm. But most devices do not have this function. In addition, it is necessary that the nozzle matches the internal length of the toilet bowl.

When choosing a prefix or cover for a bidet, it is advisable to give preference to models with a retractable nozzle. This option is the most convenient, because it does not complicate the use of the toilet

For bidet covers, the distance from the drain tank to the edge of the toilet matters. If it is smaller than the size of the cover control unit, it will not be possible to install it.

When choosing a bidet nozzle, one should take into account not only its overall dimensions, but also the shape of the flush tank mounted on the toilet. If it does not match the configuration of the set-top box, it will be impossible to correctly install it.

And one more important point. When buying equipment should be especially careful about its quality. A large number of fakes of well-known brands appeared on the market, so all the accompanying documentation should be carefully studied.

The device must be accompanied by certificates of conformity and quality, documents for warranty service. The latter must be filled out by the seller.

Conclusions and useful video on the topic

Video # 1. What is a toilet bidet cover and what additional functions can it perform:

Video # 2. How to install the bidet prefix on the toilet:

Video # 3. Installation procedure for the bidet cover on the toilet:

A bidet is, of course, necessary in every bathroom, but not in every room it can be placed.In this case, a variety of bidet consoles can be considered the best option. They do not occupy free space, but at the same time they work very efficiently.

The user receives multifunctional equipment, very convenient to use. When choosing the type of such a prefix, it is important to take into account the wishes of those who will use it, and the future conditions for its operation. Then the purchase will be successful.

Tell us about how you selected and installed a bidet-prefix, what criteria were guided by. Please write comments in the block below. Ask questions here, share useful information and photographs on the topic of the article.